Media Download

How to Reset Canon MP145 waste ink counter

These are the step How to Reset waste ink counter (error E16) :
 
1. Turn off power button (power button is in ),
Press and Hold STOP/RESET then Push ON/OFF button
2. Hold ON/OFF button, press STOP/RESET button 2x
3. Let both of button and printer in to SERVICE MODE
4. Printer will be charging
5. After printer finish charging, ush STOP/RESET button 4x. (Waste ink counter reset)
6. Every time you push STOP/RESET button ,
ON/OFF lamp will change green and oranye.
7. Turn off printer dan and take out POWER button
8. Turn on printer again.

Available link for download

How to Reset Canon Printers to Clear the Ink Waste Tank Error Message

 Resetter Ink Level Canon IP 1200, 1300, 1600, 1700, 1800, 1880, 2200, 2500

On occassion, Canon brand printers will report an error that the "Ink Waste is Full" (or similar error) that prevents the user from printing. One method that will enable the user to continue to print and postpone sending the printer to the manufacturer to perform maintenance on the ink waste tank, is to perform a reset on the printer that will clear the error so that the user can then proceed with the print job. The following instructions will enable the user to perform the reset mentioned above.

Instructions :

1.  First, unplug the power from the printer and all connections (including usb to the PC as well)

2.  Next, press and hold the Start button while plugging the power back into the printer.

3.  While still holding the Start button, press the Resume button twice (which then allows for Removal of Ink          Cartridges(if you are past the limit otherwise leave them in).

4.  Now repeat Step 1 and then repeat Step 2 above.

5.  Press the Resume button 4 times (note that the light will only blink the first two times of the four times that        you press the button)

6.  The error should now have cleared so that you can use the printer.

Available link for download