Tuesday, October 18, 2016

How to Reset Canon Printers to Clear the Ink Waste Tank Error Message

How to Reset Canon Printers to Clear the Ink Waste Tank Error Message


 Resetter Ink Level Canon IP 1200, 1300, 1600, 1700, 1800, 1880, 2200, 2500

On occassion, Canon brand printers will report an error that the "Ink Waste is Full" (or similar error) that prevents the user from printing. One method that will enable the user to continue to print and postpone sending the printer to the manufacturer to perform maintenance on the ink waste tank, is to perform a reset on the printer that will clear the error so that the user can then proceed with the print job. The following instructions will enable the user to perform the reset mentioned above.

Instructions :

1.  First, unplug the power from the printer and all connections (including usb to the PC as well)

2.  Next, press and hold the Start button while plugging the power back into the printer.

3.  While still holding the Start button, press the Resume button twice (which then allows for Removal of Ink          Cartridges(if you are past the limit otherwise leave them in).

4.  Now repeat Step 1 and then repeat Step 2 above.

5.  Press the Resume button 4 times (note that the light will only blink the first two times of the four times that        you press the button)

6.  The error should now have cleared so that you can use the printer.

Available link for download