Showing posts with label messages. Show all posts
Showing posts with label messages. Show all posts

Sunday, April 16, 2017

How to Retrieve deleted facebook messages Videos on Android And PC

How to Retrieve deleted facebook messages Videos on Android And PC


Overview About Trick

Today we will see How to Recover deleted facebook messages,Photos and Videos and much more on facebook.
Basically its a Facebook Feature which not many people are aware .
Many a times We Delete Messages,Photos or Videos from our profile which is not intentional but once we do , we can not undo it. and its gone forever. But wait, There is a saying: Nothing is Lost, until MOM can’t find it, Likewise in this case even if you delete anything from your facebook account, you can get it back. Facebook have all your data in their archive which you can download too

REcOVERY fb data sTEPS

Follow the Below simple steps to Know how you can get back and have access to your deleted  data of your facebook profile.

Step 1: First of all,You will have to Click here to open Facebook General account Settings.

Step 2: Once you open your general settings, you will see Download a Copy of your Facebook Data, So click on it to.
Step 3: On the Next page you will see a Download Archive Button, Click on it and you will be prompt to enter your Password to Continue, This is a Security Step by Facebook.

Step 4: After entering your Facebook Password, Click on Submit, On the next screen you will be shown that the download link for your data will be sent to your email id which you used to create your facebook account.

Step 5: Wait for Few Minutes, check your mail. You will see a mail from facebook in your Inbox with Downloading link ready for you to download all your data.

.Step 6: Now After downloading the file. Unzip it and open the folder where you will find your messages, photos, videos. Pokes, Friend list etc.

The Files will be in .html format so you will have to double click on the file and select your Favourite Browser to open the file, the File will open up in your browser where you will have access to all your data..

I Hope this guide will help someone or other who didn’t already know that you can actually Retrieve Deleted Facebook Messages,Photos and Videos.



Available link for download

Read more »
Posted by at
Labels: , , , , , , , , , ,

Saturday, March 25, 2017

HP LaserJet Error Messages F M

HP LaserJet Error Messages F M


Message on printer display
What it means
What to do
FILE SYSTEM IS FULL
The disk file system is full.
1. Delete all unnecessary files from the EIO disk and then try again. Use HP Resource Manager to download or delete files and fonts. (See the software help for more information.) 2. Advise the customer to increase the permanent storage (use a larger EIO disk or add a RAM DIMM).
FLASH DEVICE FAILURE
The flash DIMM had a critical or fatal failure.
1. Reseat the flash DIMM and ensure it is locked into place. 2. Remove the flash DIMM and replace it with a new one. 3. The formatter could also be bad; replace formatter if needed.
FLASH FILE OPERATION FAILED
The requested operation could not be performed (for example, attempting to download a file to a nonexistent directory).
1. Check the file name and the directory name. 2. Reseat the flash DIMM. 3. Retry the operation.
FLASH FILE SYSTEM IS FULL
The flash file system is full.
Delete unnecessary files from the flash DIMM and try again. Use HP Resource Manager to download or delete files and fonts. (See the software help for more information.)
FLASH IS WRITE PROTECTED
The flash DIMM is protected and no new files can be written to it.
Disable the write protection through HP Resource Manager.
HP TONER DETECTED alternates with PRESS GO TO CONTINUE
The printer has detected that the toner cartridge is not a genuine HP toner cartridge because it does not see or recognize the toner cartridge’s identification (model, manufacturing date, and serial number).
1. Make sure the toner cartridge is a genuine HP toner cartridge. A non-HP toner cartridge will produce this error. Any printer repair required as a result of using non-HP toner is not covered under the printer warranty. 2. If the HP toner cartridge is new, the Elabel (cartridge memory) is missing or has been tampered with. 3. If the HP toner cartridge is used, the printer will not recognize the cartridge until 20 pages have been printed. After 20 pages have been printed, the error message disappears. 4. If the HP toner cartridge is used, and the error message remains after 20 pages have been printed, the cartridge has previously run out of toner. Replace the toner cartridge.
INPUT DEVICE CONDITION [XX.YY]
An input paper-handling device has a condition that needs attention before printing can resume. 1st X = Device number in chain 2nd X= Device type (three types): 1 = Input 2 = Output 3 = Stapler/stacker unit YY = Device specific error
1. Turn the printer off. 2. Disconnect the cable to the input paper handling devices and then reconnect it. 3. Ensure the device is properly connected and any doors or paper guides are properly closed. 4. Turn the printer on. 5. See the documentation that came with the paper-handling device for assistance.
INSTALL DUPLEXER
The printer is unable to print the current job because the duplexer is not installed or not inserted correctly.
1. Turn the printer power off. Install or reinsert the duplexer and ensure it is fully seated. 2. Ensure the right-angle power cord is used for the printer.
INSTALL TONER CARTRIDGE
The toner cartridge has been removed and must be reinstalled for printing to continue.
Reinstall the toner cartridge and ensure it is fully seated. The high voltage power supply might also cause this error.
INSTALL TRAY [X]
The printer is unable to print the current job because the specified tray [X] is open or not inserted correctly
1. Reinsert the specified tray. 2. Check for damaged tabs on the right side of the tray. 3. Check for damaged tray sensor switches in the printer. 4. Replace the PCA controller in the feeder
LOADING PROGRAM [NUMBER] alternates with DO NOT POWER OFF
Programs and fonts can be stored on the printer’s file system. At startup time, these entities are loaded into RAM. (These entities can take a long time to load into RAM depending on the size and number of entities being loaded.) The specifies a sequence number indicating the current program being loaded.
Available link for download

Read more »
Posted by at
Labels: , , , , ,

Sunday, January 15, 2017

HP LaserJet Error Messages A E

HP LaserJet Error Messages A E




Message on printer display
What it means
What to do
ACCESS DENIED MENUS LOCKED
The control panel function you are trying to use has been locked by the network administrator to prevent unauthorized access.
1. Ask the network administrator to unlock the function. 2. Perform a cold reset. This will reset the printer to factory defaults. If a JetDirect network card is installed it will also reset the IP address and other settings so you might want to remove the JetDirect before performing the cold reset.
BAD DUPLEXER CONNECTION
The duplexer is not correctly installed.
1. Some printers need a right-angle power cord for a duplexer to be installed correctly.   Make sure right-angle cord is installed, if needed. 2. Turn the printer off. 3. Remove and reinstall the duplexer. 4. Turn the printer off and back on. 5. If the message persists, make sure the duplexer is connected and the connector is not damaged. 6. Replace the duplexer.
CHECK INPUT DEVICE alternates with PAPER PATH OPEN PLEASE CLOSE IT
The optional input tray cannot feed print media to the printer because a door or paper guide is open
1. Check the doors and paper guides and close any that are open. 2. If doors and trays are closed, check tabs and sensor levers in the tray for proper operation. Replace any defective tabs or sensors. 3. Replace the PCA controller in the feeder. For 5si, 8000, 8100 series make sure C-link cable is correctly hooked up. Also on the 5si check the paper accessory PCA.
CHECK OUTPUT DEVICE alternates with CLOSE OUTPUT DELIVERY PATH
The optional output device is not properly connected to the printer.
1. Ensure the optional output device is fully seated and properly installed. 2. Check any doors on the output device and verify they are closed.  For 5si, 8000, 8100 series make sure C-link cable is correctly hooked up.
DISK DEVICE FAILURE
The EIO disk had a critical failure or fatal error.
1. Reseat the EIO disk. 2. Remove the EIO disk and replace it with a new one. 3. A bad formatter assembly could also cause this error, replace if needed.
DISK FILE OPERATION FAILED
Requested operation could not be performed (for example, attempting to download a file to a nonexistent directory).
1. Check the file name and the directory name. 2. Reseat the EIO disk. 3. Retry the operation.
DISK IS WRITE PROTECTED
The EIO disk is protected, and no new files can be written to it.
Disable the write protection through HP Resource Manager.
EIO DISK [x] NOT FUNCTIONAL
EIO disk is not working correctly
1. Reseat the EIO disk in slot [X]. 2. Remove and replace the EIO disk in slot [X].
ENV FEEDER LOAD [TYPE] [SIZE]
A job has been sent to the envelope feeder and the feeder is empty, the wrong size is loaded in the feeder, or the type and size are set incorrectly on the control panel.
1. Load the requested envelope type and size into the envelope feeder. 2. Make sure the envelope size and type are set correctly from the paper-handling menu in the printer control panel. 3. Press GO if the desired envelope is already loaded in the feeder. 4. Press -VALUE+ to scroll through other available types and sizes. 5. Press SELECT to accept the alternate type or size.
ENVELOPE FEEDER SIZE = [xxxxx]
The printer is asking what size envelopes have been loaded in the envelope feeder.
In response, you can take either of the following actions: 1. Press SELECT to accept the current envelope size. 2. Press -VALUE+ to change the size and then press SELECT to accept the new size. If you do not press any buttons, the message disappears in about one minute. Note Changing the size here changes the default for the envelopefeeder size in the paper-handling menu.
ENVELOPE FEEDER TYPE = [xxxxx]
The printer has received a job under the following conditions: The envelope type the job requested is not available in the printer. Envelopes have been placed in the envelope feeder (thus triggering the paper sensor).

 Available link for download

Read more »
Posted by at
Labels: , , , , ,

Friday, October 21, 2016

HP LaserJet Error Messages S – Z

HP LaserJet Error Messages S – Z




Message on printer display
What it means
What to do
SHORTAGE PAGE SIMPLIFIED
The printer had to compress the job to fit it in available memory. Some data loss might have occurred.
1. Press GO to continue. (The print quality of these pages might not be acceptable.) Add more memory to the printer or to simplify the print job
RAM DISK IS WRITE PROTECTED
RAM disk is protected, and no new files can be written to it.
Disable the write protection through HP JetAdmin.
TONER LOW
The message first appears when about 15 percent of the toner is remaining in the toner cartridge (about 1,500 pages remaining for the 10,000-page cartridge and about 900 pages remaining for the 6,000- page cartridge at five percent coverage). Depending on how the printer has been configured in the configuration menu, it will either continue to print or stop.
If the printer has stopped, you can resume printing by pressing GO for each job.  The high voltage power supply could also cause this error.
TONER OUT
The toner cartridge has run out of toner. Depending on how the printer has been configured, it will either continue to print or stop. Due to the resolution of the toner level sensor, it is possible that a small amount of toner (less than one percent) might still be present in the cartridge.
If the printer has stopped, you can resume printing by pressing GO for each job. Replace toner cartridge. The high voltage power supply could also cause this error.
TRAY [X] EMPTY [TYPE] [SIZE]
The specified tray is empty, but the current job does not need this tray in order to print correctly. If this message appears and the tray contains print media, a sensor could be damaged.
1. Load the empty tray (x) to clear the message. If you do not load the specified tray, the printer will continue printing from the next available tray, and the message remains. 2. If the message remains after the specified tray is loaded, check sensor arm flags for damage and be sure they move freely. 4. Replace defective paper out sensors.
TRAY [x] LOAD [TYPE] [SIZE] where x is tray 2, 3, or 4
This message occurs for the following reasons: Tray 2, 3, or 4 was requested, but the tray is empty. Tray 2, 3, or 4 was requested, but the adjustments are not set for the requested type or size.
1. Make sure that all three paper size adjustments have been made. Also make sure that the type has been set at the control panel. 2. Load the requested media into an indicated tray. Ensure the tray is fully seated.   4. Make sure the paper tray is set for the proper size.  Also you might need to replace the cassette size PCA.
TRAY 1 LOAD [TYPE] [SIZE]
The print job has requested a size and/or type of media that is not loaded.
Load the requested print media into tray 1 (or any other desired tray). - Ensure that the trays are correctly adjusted for size. - The tray type settings (and size for tray 1) must be set from the paper-handling menu. If this message appears and the correct media is loaded: - Ensure that all paper size adjustments have been properly performed (see page 220). - Ensure the tray type setting is correct in the paper-handling menu. - Check the size tabs on the right side of the tray. - Check the size switches and paper sensors. - Ensure the tray is fully seated.
TRAY 1 SIZE = [xxxx]
The printer is asking what size of media has been loaded in tray 1.
In response, you can take either of the following actions: 1. Press SELECT to accept the paper size. 2. Press -VALUE+ to change the size and then press SELECT to accept the new size. The printer will first display the TRAY 1 TYPE = XXXX message (see the description of that message). If you do not press any buttons in the time-out period (about one minute), it displays this TRAY 1 SIZE = XXXX message. Changing the size here changes the default for tray 1 paper size in the paper-handling menu.
TRAY 1 TYPE = [xxxx]
The printer has received a job under the three following conditions: - The media type requested by the job is not available in the printer. - Tray 1 has been set for CASSETTE. - Media has been placed in tray 1 (thus triggering tray 1’s paper sensor). If you do not press any buttons, the message disappears in about one minute).
You can take either of the following actions: 1. Press SELECT to accept the paper type. 2. Press -VALUE+ to change the type and then press SELECT to select the new type. Note Changing the type here changes the default for tray 1 media type in the paper-handling menu. If you do not do anything during the time-out period (about one minute), the printer will print on the media in tray 1.
UNABLE TO MOPY JOB
Memory or file system failures would not allow a mopy job to occur. Only one copy will be produced.
1. Reseat RAM DIMMs and/or the EIO hard disk. 2. Install additional memory or an EIO hard disk.
Available link for download

Read more »
Posted by at
Labels: , , , , , ,
Subscribe to: Posts (Atom)